COLLECTION MOBILE ENGLISH CHINA
THE CURRENT POSITION:HOME > APPLICATION TECHNOLOGY
The design guides of membrane bioreactor (MBR)
【The specification and performance of membrane bioreactor (MBR)】

Model

KJ-MBR-12

KJ-ESMBR-S16

KJ-ESMBR-SH70

Performance

Flux M3/D

1。0

1。3

5.2~6.0

SizeL*W

810X525mm

1300X890mm

Specifications

Type

Shade type

With online cleaning type of shade type membrane

Membrane area

11。86m2

15.75m2

70m2

Material

Modified PP

X60 anti-pollution modified PP

X60 anti-pollution modified PP/High porosity

Max pressure

-0.05 MPa

Max differential pressure

0.05 MPa

Operating pressure

-0.01-0.05 MPa

Residual chlorine concentration

2000ppm

Chemical cleaning

yes

Online cleaning,effect is better

Max temperature

45

PH

114

Operating type

Negative pressure suction

Process conditions

Frequency of cleaning

36 months

Sterilization drug

NaClO or Formaldehyde

Chemical

HCLNaOHNaClO/NaOH


[The design size of membrane connection ]

[The installation diagram of MBR membrane frame]

Note: For the convenience of making membrane frame, can provide a molding standard MBR membrane slot (material: 6 mm thick PVC), please click into

[The installation design parameters of membrane bioreactor]
★ Frame material :Stainless steel square bar or A3 steel
★ Element spacing: 80~90mm
★ The distance between frame and biochemical pool wall ≥300mm
★ The distance between frame and frame ≥400mm(The best≥600mm)
★ Flux:ESMBR-S16≤200m3/d;ESMBR-SH70≤270m3/d

1。“The main pollution and anti-pollution method of MBR membrane”please click into
2、Download the MBR/ESMBR operation instruction please click into

[ Hydrophilic treatment and operation mode of the MBR membrane element ]
If the customers buy the hydrophobic MBR membrane element, for hydrophilic treatment before using, treatment method is using the 95% of the industrial alcohol to immerse about 15 minutes, and then rinse with water . If not use immediately after the hydrophilic, should be sealed packaging to keep membrane wet
六. Prevent to block the membrane hole and cleaning
Through the aeration system to produce bubbles and water flow, to make the membrane silks shake and clean. At the same time ,using the intermittent operation mode,, can prevent membrane pore to block, and its possible that the system has the long-term stable operation.When the system is operating, keeping stable flow, by the pressure gauge to read operation pressure,working negative pressure -0.01 ~ -0.05MPa,when the operating pressure is more than -0.05MPa, need to clean the MBR membrane element.

“Membrane bioreactor (MBR) and membrane element”please click into